Robert's 32H Paul FHub & Word Disc Hubs on Salsa 29er Race Delgado Rims

We built these for customer Robert's custom Independent Fabrication Single-Speed 29er.

Paul black 32H FHub disc 100 front hub

Paul black 32H Word Disc 135mm rear hub

Salsa Race Delgado 29er black disc rims

3 cross pattern

DTSwiss stainless steel black spokes and black (brass) nipples.

• Spokes for the rear drive side (no disc) = 16 x 293 mm



• Spokes for the rear non-drive side (disc) = 16 x 293 mm



• Spokes for the front (non disc)  = 16 x 293mm



• Spokes for the front (disc)  = 16 x 292mm

* Remember: If you are used to building non-disc front bike wheels, disc front wheels use different spokes lengths for each side. If you build road bike wheels or mountain bike wheels with rims that accept caliper, cantilever, or V brakes, you can usually assume the 100mm front hub measurements will allow you to use the same length of spoke for both sides of the wheel. (The front hub has the same left and right center-to-flange measurements, and there is no dish to the front wheel, since there are is no cassette or freewheel.) So, check all your hub measurements when you are building front disc hubs.

Photo taken by Wheelgirl

Jeff's 32H Phil Wood Gold Track Hubs on Velocity Red Deep Vs

• Phil Wood gold 32H High-Flange Track Single Fixed 120mm rear hub



• Phil Wood godl 32H High-Flange Track 100mm front hub



• Velocity Deep V 32H red rims (non-machined)



• 3 cross pattern



• Sapim DB 14/15/14 stainless steel black spokes and black Polyax nipples
  • Spokes for the rear drive (fixed) side = 16 x 280 mm
  
  
  
  • Spokes for the rear non-drive side = 16 x 281mm
  
  
  
  • Spokes for the front  = 32 x 281mm



• Velocity red Veloplugs = 64

Pete's Halloween Treat for Narda 32H Campagnolo Record Hubs Orange Velocity Aerohead Rims

• Campagnolo Record black 32H 10-speed rear hub 130mm



• Campagnolo Record black 32H 10-speed front hub 100mm



• Velocity Aerohead Orange 700c OCR rear rim (machined sidewall)
  • Note: Make sure you calculate spoke length to the correct ERD for each rim type. An OCR rim (off center rim) has an off-center drilling to reduce the dish, and thereby the difference in drive side and non-drive side spoke tensions. The ERD for an OCR is different than the ERD for a normally drilled rim.
    • ERD = 598 for OCR Aerohead 700c.
    
    
    
    • ERD = 602 for Aerohead 700c normal drilling.



• Velocity Aerohead Orange 700c front rim (machined sidewall)



• Sapim DB 14/15/14 stainless steel black spokes and black Polyax nipples
  • Spokes for the OCR rear drive side are 3 cross = 16 x 290mm
  
  
  
  • Spokes for the OCR rear non-drive are 3 cross = 16 x 292mm
  
  
  
  • Spokes for the front are radially laced  = 32 x 282mm
    • (I know. But style and sense said refrain from 3-xing a Campy Record front hub for a 125 lb female road racer who once put 100,000 miles [yes, five zeros] on a Campy bottom bracket.)

Daniel's 32H Black Paul Flip/Flop Track Hubs on Velocity White Deep Vs

• Paul black 32H High-Flange Track Fixed/Free 120mm rear hub



• Paul black 32H High-Flange Track 100mm front hub



• Velocity Deep V 32H white rims (non-machined)



• 3 cross pattern



• Sapim DB 14/15/14 stainless steel black spokes and black Polyax nipples
  • Spokes for the rear fixed side = 16 x 281mm
  
  
  
  • Spokes for the rear free side = 16 x 281mm
  
  
  
  • Spokes for the front  = 32 x 281mm



• Velocity red Veloplugs = 64

FYI: I was a lab rat and tried Velocity veloplugs on my own fixie. When changing a flat, I did have one or two of the plugs unseat themselves and not fit snuggly back into the spoke hole again. It was kind of a pain. So, I am back to Velox rim tape. Daniel is  giving them a test on his ride to see what his experience is with the light, waterproof, plastic plugs that fit in the spoke holes. (The veloplugs are the red dots in the photos.)

Photos taken by Wheelgirl

Matthew's 32H Silver Phil Wood Flip/Flop Track Hubs on Velocity Purple Deep Vs

• Phil Wood high-polish silver 32H Fixed/Free  120mm rear hub



• Phil Wood high-polish silver 32H  100mm front hub



• Velocity Deep V 32H purple rims (machined)



• 3 cross pattern



• Sapim DB 14/15/14 stainless steel silver spokes and silver Polyax nipples
  • Spokes for the rear fixed side = 16 x 280mm
  
  
  
  • Spokes for the rear free side = 16 x 280mm
  
  
  
  • Spokes for the front  = 32 x 281mm

These are part of Matthew's classic black-and-white Mercier fixie conversion.

Daniel's Paul Black Flip/Flop Track Hubs on White Velocity Deep Vs

281 32H 3x front black

281 32H 3x rear black

Tom's 32H 3x Formula Sealed-Bearing Track Hub on Sea Green Velocity Deep V

• Formula 32H sealed-bearing flip flop hub 120mm black



• Velocity Deep V 32H Sea Green Rim (Non-Machined)



• 3 Cross Pattern



• Sapim DB 14/15/14 Stainless Steel Black Spokes and Black Polyax Nipples
  • Spokes for the Rear Fixed Side = 16 x 280mm
  
  
  
  • Spokes for the Rear Free Side = 16 x 280mm

This is going on Tom's light blue vintage Centurion fixie. The machine-built wheels could not withstand the rigor of his riding style.

Eavon's 28H 3x Chris King Classic Road Hubs on Velocity Aerohead

• Chris King Classic Road Hubs 28H 130mm Black



• Chris King Classic Road Hubs 28H 100mm Black



• Velocity Aerohead 28H Front Rim and 28H OCR Rear Rim (Machined)



• 3 Cross Pattern



• Sapim DB 14/15/14 Stainless Steel Silver Spokes and Silver Polyax Nipples
  • Spokes for the front= 28 x 298mm
  
  
  
  • Spokes for the Rear Non-Drive Side = 14 x 296mm
  
  
  
  • Spokes for the Rear Drive Side = 14 x 294mm

These are going on Eavon's road bike, so that he has sealed-bearing, high-performance training and fast touring wheels.

Heather's 32H 3x Phil Wood Fixed/Free High-Flange SLR Track Hubs on Velocity Fusions

• Phil Wood High-Flange 32H 120mm Fixed/Free Rear Track Hub SLR High-Polished Silver



• Phil Wood High-Flange 32H 100mm Front Track Hub SLR High-Polished Silver



• Velocity Silver Fusion 32H Rims (Only in Non-Machined Sidewall)



• 3 Cross Pattern



• Sapim DB 14/15/14 Stainless Steel Silver Spokes and Silver Polyax Nipples
  • Spokes for the front= 32 x 285mm
  
  
  
  • Spokes for the Rear Fixed Side = 16 x 285mm
  
  
  
  • Spokes for the Rear Free Side = 16 x 285mm

These are going on Heather's black IRO Mark V single-speed with the pink Chris King headset, pink Sugino track crank, pink and white seat.